Sirui P204S Tripod with VA-5 Video Head
Sirui
-
₱ 13,500.00
-
In Stock
-
Available BDO, HSBC, BPI installment:
3 x ₱ 4,500.00
SRP
- Removable Base Converts to Mini Tripod
- 360° Panning Hand Grip
- Rubber and Spiked Foot
- Sturdy Aluminum Alloy Build
**Camera not included, for visual purpose only.
Monopod/Tripod
Load Capacity | 17.6 lb / 8 kg |
Max Height | 63" / 160 cm |
Retracted/Folded Height | 27" / 69 cm |
Leg Sections | 4 |
Leg Lock Type | Twist Lock |
Head
Load Capacity | 6.6 lb (3 kg) |
Quick Release | TY-70A |
Counterbalance | Spring-assisted |
General
Color | Black |
Material | Aluminum Alloy |
Warranty | 6 Years Manufacturer |
The P-204S Aluminum Photo/Video Monopod from Sirui is
a 4-section aluminum monopod with three fold-down support feet for additional
stability. In addition, an adjustable friction control ball head mechanism in
the base of the monopod and a panning hand grip enable smooth 360° pan and 20°
tilt movements. The three support feet fold up and lock into position against
the monopod and can even be removed entirely and used as a table-top tripod. A
large rubber base foot is available for conventional use and it can be removed
and replaced with the included spike foot for use on soft or slippery ground.
It weighs just 2.9 lb but can support a load up to 17.6 lb.
The mounting plate on the P-204S comes with a reversible screw that accommodates 1/4"-20 and 3/8"-16 tripod sockets or compatible heads. The maximum height reaches 63" and it can fold down to 27", three twist locks provide quick and stable adjustment. With adjustable tension control, the base locking collar enables the monopod to stand upright on its own.
The SIRUI
VA-5 Ultra-Compact Video Head uses
a fluid system to produce smooth pans and tilts for DSLRs and compact video
cameras weighing up to 6.6 lb. It features independent pan and tilt locks and
uses an internal spring-assisted counterbalance mechanism for smoother tilt
movements with heavier cameras. A TY-70A quick-release plate comes included,
for forward/backward adjustment possible when attached to the head to help
balance your camera. A dual safety lock system prevents the plate and your
camera from falling off the head when the primary locking mechanism is loosened.
To release the plate, simply press the secondary release button. To assist in
horizontal alignment of your shots, the head has two bubble levels: one on the
base of the head to align the tripod and one on the top of the head to align
the camera. One pan handle comes included.